Food truck planner
Plan your food truck in 3D
Pick a van, a truck or a trailer, fit out the kitchen, and send it to us for a quote.
Your browser could not start the 3D view, or it stopped. This usually means 3D graphics are switched off in the browser. Close and reopen the browser, or in Chrome or Edge go to Settings, then System, and turn on "Use graphics acceleration when available", then reload this page. You can still tell us what you have in mind through the quote form, or call us on 0447 452 222.
2D plans
Each plan shows the inside sizes in millimetres, and the numbers match your layout list. Tap a plan to save it.
Pictures
Your layout
Nothing has been placed inside yet.
Walls are named as you stand at the rear looking forward, so the serving side (the kerb side) is on your left. Tap a line to go back and change that item.
Layout checks
These checks are a guide from the Food Standards Code and council guidance. They are not a council approval, and they are not gas, plumbing or electrical advice.
This is an illustration, not a quote, a design drawing or advice on permits, gas or electrical work.
This planner was created by Australian Technology Partners.
Request a quote for this layout
We have attached two pictures of your layout and written out what you chose. Add your details, your menu and where you plan to trade.
How the planner works
The planner draws each van, truck body and trailer to a typical real size, so you can see how much room a griddle, a fryer, a sink or a fridge takes and how wide the aisle is. Nothing is sent to us until you send the quote form, and your layout is remembered on this device.
The equipment is drawn at typical sizes, and your own equipment may differ. Every item keeps a working space clear in front of it, so the planner will not let you block a fridge door or the aisle. The layout checks look for a separate hand wash basin, a double bowl sink and an exhaust canopy over the cooking equipment. They are a guide only. Your council approves the vehicle, and licensed trades design, connect and certify the gas, water and power.
Read more about food trucks and food vans and food trailers, or our food truck and food van fit-out guide.
The bases in the planner
These are typical sizes. We measure the actual van, truck or trailer before we build, and a body we build for you is made to the size your menu needs.
- A long wheelbase high roof van is about 4.41 m long, 1.79 m wide and 2.01 m high inside, with the floor about 0.62 m above the ground.
- A light truck body is about 4.20 m long, 2.12 m wide and 2.00 m high inside, with the floor about 1.00 m above the ground.
- A medium rigid truck body is about 6.50 m long, 2.40 m wide and 2.20 m high inside, with the floor about 1.10 m above the ground.
- A 3 metre food trailer is about 2.90 m long, 2.10 m wide and 2.10 m high inside, with the floor about 0.80 m above the ground.
- A 4 metre food trailer is about 3.70 m long, 2.10 m wide and 2.10 m high inside, with the floor about 0.80 m above the ground.
The serving windows are drawn on the left hand side as you face forward. That is the kerb side in Australia, so your customers stand on the footpath, not the road.