Container planner
Plan your container in 3D
Choose a container size, place the doors, windows, walls and furniture where you want them, and send us the layout for a quote.
Everything you see here is an illustration. It is not a quote, an engineering drawing or permit advice. Sizes, structure, finishes and what your site needs are agreed with you when we quote.
Your browser could not start the 3D view. You can still tell us what you have in mind through the quote form, or call us on 0447 452 222.
2D plans
Each plan shows the inside sizes in millimetres, and the numbers match your layout list. Tap a plan to save it.
Pictures
Your layout
Nothing has been placed inside yet.
Walls are named as you stand at the cargo doors looking in. Tap a line to go back and change that item.
Request a quote for this layout
We have attached two pictures of your layout and written out what you chose. Add your details, where the container is going and what you will use it for.
How the planner works
The planner draws each container to its real outside and inside size, so you can see how much room a bed, a kitchenette or a desk really takes. Everything happens on your own phone or computer, and nothing is sent to us until you send the quote form. Your layout is remembered on this device so you can come back to it.
The planner is a way to show us what you have in mind. It does not check structure, wind or footing design, plumbing, electrical work, energy ratings or what your council allows, and the furniture and fittings are typical sizes for illustration. Cutting openings or joining two containers changes the strength of the steel, so that work is designed and framed properly when we quote, with an engineer where it is needed. Read more about container homes and conversions, granny flats and small second homes and site offices, lunchrooms and tool rooms.
Container sizes in the planner
These are the sizes most often sold in Australia. A high cube container is about 300 mm taller than a general purpose one, which makes a real difference once the ceiling is insulated and lined. Inside sizes vary by a few millimetres between manufacturers, so we measure the actual container before we build.
- A 10 foot general purpose container is 2.99 m long, 2.44 m wide and 2.59 m high outside, and about 2.83 m long, 2.35 m wide and 2.39 m high inside.
- A 20 foot general purpose container is 6.06 m long, 2.44 m wide and 2.59 m high outside, and about 5.90 m long, 2.35 m wide and 2.39 m high inside.
- A 20 foot high cube container is 6.06 m long, 2.44 m wide and 2.90 m high outside, and about 5.90 m long, 2.35 m wide and 2.70 m high inside.
- A 40 foot general purpose container is 12.19 m long, 2.44 m wide and 2.59 m high outside, and about 12.03 m long, 2.35 m wide and 2.39 m high inside.
- A 40 foot high cube container is 12.19 m long, 2.44 m wide and 2.90 m high outside, and about 12.03 m long, 2.35 m wide and 2.69 m high inside.
The 80 square metre home is three high cube modules joined side by side, each 10.93 m long, which comes to just under the 80 square metres Victoria allows for a small second home. You can also join up to five containers of one size and see the floor area as you go.