Start with the menu, not the truck
Most people who call us about a food truck have already found a vehicle they like. We ask about the menu first, because the menu decides the equipment, the equipment decides the weight and the layout, and those two things decide which vehicle will actually do the job. A coffee and pastry van, a burger truck with a grill and two fryers, and a wood fired pizza truck are three very different builds.
Before you ask for a quote, it helps to write down what you will cook, how many people will work inside at once, and where you expect to trade. That one page saves a lot of changes later.
Food truck, food van or food trailer
Each option suits a different kind of business, and it is worth being honest about how you will use it.
- A food truck is a box body on a light truck chassis. It gives you the most room and standing height, it carries the most weight, and it is one vehicle to park and set up.
- A food van or coffee van is a fit-out inside an existing van. It is easier to drive and park, and it suits a short menu with lighter equipment.
- A food trailer is towed behind another vehicle. It can cost less to get started, but you need a suitable tow vehicle, and reversing and setting up take more time.
At VN Truck Bodies we build all three in our Keysborough workshop. You can read what we build on our food trucks and food vans page and our food trailers page.
Weight is the question people leave too late
A fitted kitchen is heavy. Stainless benches, fridges, fryers full of oil, a full water tank, a waste tank, gas bottles, stock and two or three people all count towards the weight of the vehicle. Every vehicle has a gross vehicle mass, or GVM, which is the most it may legally weigh when loaded.
In Australia a car licence covers vehicles up to 4.5 tonnes GVM, so many operators want to stay under that figure. That is possible for many menus, but it has to be planned from the first drawing. We work out the weight of the finished truck against the chassis before we quote, so you do not end up with a kitchen you cannot legally fill with water and stock.
What the kitchen has to include
Mobile food businesses in Australia are covered by the national food safety standards, and Standard 3.2.3 sets out what the premises must have. In plain terms, your council's environmental health officer will expect to see the following.
- A supply of drinking quality water that is large enough for the day's trade, and a tank for waste water.
- A hand basin that is used only for washing hands, with warm running water, soap and paper towel.
- Sinks for washing equipment, sized for what you use.
- Floors, walls, ceilings and benches that are smooth, sealed and easy to clean.
- Fridges that keep cold food at 5°C or colder and equipment that keeps hot food at 60°C or hotter.
- Somewhere enclosed to store rubbish.
Councils add their own detail, such as the size of the hand basin or coved flooring, and the detail is not the same in every council. We ask you to speak to your council before the build starts and to send us their fit-out guide, and then we build to it.
Registering a food truck in Victoria
Registration is the owner's job, not the builder's, but it affects the build, so it is worth understanding early. In Victoria, mobile and temporary food businesses are registered through FoodTrader, the online system that replaced Streatrader. You apply to one council, usually the council where you prepare or store the food, or otherwise where the vehicle is kept.
What the council asks for depends on the class of food business. A truck that cooks and serves high risk food is treated differently from a van that sells packaged food or coffee. Trading on public land, such as a street or a park, usually needs separate approval from the council that manages the land. These rules change from time to time, so please check the current requirements with your council before you rely on anything written here.
Gas, power and the vehicle approval
Gas and electrical work on a food truck must be done by licensed trades. In Victoria, gas work on a mobile catering vehicle is overseen by Energy Safe Victoria, and the gasfitter works to the gas installation standard AS/NZS 5601 and arranges the inspection. Electrical work is done and certified by a licensed electrician.
For a vehicle up to 4.5 tonnes GVM, Victoria's vehicle standards also treat fitting gas or mains style electrical systems as a modification that needs an approval certificate from a signatory under the Vehicle Assessment Signatory Scheme, known as VASS. Heavier trucks follow the national heavy vehicle modification rules instead. We build the body and the fit-out so that it is ready for these trades and checks, we can coordinate with your gasfitter and electrician or with trades we work with, and we include any engineering sign-off the build needs in your quote.
Questions to ask any food truck builder
- Will you weigh up the finished truck against the chassis before I commit?
- Who does the gas and electrical work, and who arranges the certificates?
- Will you build to my council's fit-out guide, and will you talk to the environmental health officer if they have questions?
- Can I see the layout drawn up before you start cutting?
- What happens if I change the menu and need to move equipment later?
- What does your warranty cover?
What to bring when you ask for a quote
We quote every food truck individually, because no two are alike. The quote is quicker and more accurate if you can tell us the menu and the equipment you plan to use, the vehicle you own or are considering, how many people will work inside, and whether you need the hatch on the kerb side, the rear or both. Photos of a truck you already own help a great deal.
Talk to us about your food truck or trailer
If you are planning a food truck, a food van, a coffee van or a food trailer in Melbourne, call VN Truck Bodies on 0447 452 222 or come and see us at 17 Cambria Road, Keysborough VIC 3173. We will look at the vehicle, talk through the menu and tell you plainly what will work.